Chapter 598 Equipment, All the Most Advanced!

The color tone of the entire factory interior is white, which is the same as most of the factory buildings.

What is very special is that in the interior of the workshop, whether it is the floor, the ceiling, or the wall, the materials that look very high-end are used.

At first glance, this material is nothing, but as long as you look carefully, you can still notice something extraordinary, that is, it is completely non-reflective.

You must know that the factory building is fully enclosed. In order to ensure sufficient lighting, almost 80% of the ceiling area has been made into light sources, that is, a large number of high-brightness LEDs are installed.

Normally, in such an all-white working environment, there will definitely be reflections.

But within the reach of everyone, there is no trace of reflection at all, which is a particularly peculiar feeling.

Wei Chao couldn't help but say in surprise, "Is this material called a low-light nanoplate?"

Lu Hui: "That's right, this is a new type of sheet, and we also ordered it from a foreign manufacturer for a long time to deliver it."

The crowd was amazed.

Low-light nanoplates are a new type of composite material, and the domestic technology is not mature, so they can only be ordered from abroad.

Moreover, the board of this material is very expensive, and it is calculated on the basis of square feet. Generally, enterprises only use it in a small area, such as for the decoration of laboratories.

Like Guanglan Electronics, it is very rare to install such expensive plates in the entire factory. Even those big factories are reluctant to do so.

Another key point is that even if the company is very rich, it is a huge project to order a low-light nano-board of this scale, and it is absolutely impossible to order without an order period of nearly a year.

Anyway, Light Blue Electronics is really rich enough.

Not only money, but also access.

Even Jiao Dagong, who didn't agree with him just now, felt that his mouth was wide open and he couldn't speak.

Guanglan Electronics doesn't seem to be short of money at all and needs to invest in it.

Or do they just want to be strong from the outside and work hard at the same time, and want to make the best of their appearance? In order to better defraud investment?

Jiao Dagong glanced at Li Tianyu and found that the young boss was whispering something to Xia Lei.

The two chatted quite speculatively,

In fact, this so-called low-light nanoboard is really difficult to do. Even if you have money, the manufacturer's delivery is limited for a limited time.

But that is difficult for ordinary people, but it is not difficult for Li Tianyu.

Lu Hui just mentioned this to Li Tianyu. If the chip is to be used, it needs better working conditions. The best decorative material inside the factory is the current new low-light nano-board.

Lu Hui said that this kind of material board is very popular, not only powerful, but also very durable.

There are two disadvantages.

The first, expensive, extremely expensive.

Second, the output is low.

Lu Hui said that at the time, but Li Tianyu took it to heart and said to Lu Hui, "Since that nano-board is so good, let's get it."

Lu Hui: "Do it? How to do it? That one needs to be ordered half a year in advance, and the output is low, which may not meet the needs of our installation in the factory."

As soon as Li Tianyu heard it, he immediately clapped: "Okay, let me handle this, you just need to put the specific material name, production company, and how much you need to sort out and send it to me."

Lu Hui was shocked. He didn't expect Li Tianyu to say it so succinctly, as if he could go to the building materials market to buy it back in the afternoon.

It's not plywood, nor gypsum board, and it's not something you buy with you.

But Li Tianyu is the boss, and his words are always reliable, so Lu Hui still feels that there is such a lost hope.

As for Li Tianyu, of course he doesn't fight unsure battles now, let alone say outrageous words.

He has a bragging tax system as a foundation, and even has a lithography machine. If he can make some composite sheets, of course there is no problem.

So after Lu Hui sent the information about the low-light nano-board, Li Tianyu used the system to pay taxes to buy a large quantity, and the quantity far exceeded Lu Hui's needs.

Everyone knows that if the decoration is not good, there is a chance that the estimate will be wrong.

It doesn't matter if you overestimate it, I'm afraid that you underestimate it.

Imported plates like this are not easy to buy, so it is better to order more at one time, so as not to be blinded when there is not enough time.

So in the end it became like this, the low-light nano-boards in the Guanglan electronic factory were flooded, and they were used where they should be used, and where they should not be used.

Even so, a lot of low-light nano-sheets were produced in excess, and they were used in another new factory, which was extremely extravagant.

Xia Lei: "Brother Li, this factory is very stylish. It seems that those big factories don't dare to do this. It's a bit like putting money on it directly."

Li Tianyu quickly smiled and said a few words of modesty.

Just kidding, it's much more expensive than just posting it with money.

This low-light nano-sheet is indeed ridiculously expensive. The tax Li Tianyu has to pay is almost 600,000 soft sister coins, which is not cheaper than a machine with tens of millions, or even hundreds of millions of soft sister coins.

However, the decoration of the factory is just to look at it, the key is to look at the machinery and equipment itself.

At this time, Wei Chao, Jiao Dagong and other four people have already started to look at the machinery and equipment in the distance.

This factory can accommodate three production lines. Although the equipment for making chips is larger than that of the screen panel production line, it still looks a bit empty.

Now those machines and equipment have just been arranged, and there are no workers or employees busy on the production line, so the factory seems to be a little deserted now.

When everyone looked at it from a distance, those machines and equipment were brand new, and some of them were even covered with a transparent plastic film.

Wei Chao, Jiao Dagong, Liu Xingshan, Hu Shaoming, the four chip technology experts, all looked straight for a while.

Even if not very close, some devices are recognizable.

Liu Guangshan: "Leader Wei, Team Leader Jiao, look! Is that Nikon's plasma etching machine over there?"

Wei Chao's tone was also full of surprise: "Indeed, looking at the configuration and size over there, it seems to be the latest model..."

Jiao Dagong: "No, it's impossible. It's hard to buy the latest model now. Could it be an old old model?"

Wei Chao: "Impossible, impossible, the volume of the old plasma engraving and etching machine is twice as large as that one."

Jiao Dagong was at a loss for words.

Wei Chao was right, and it was impossible for Jiao Dagong to not understand. It was just the last struggle.

Nikon's plasma etching machine is the only expensive thing in Asmar's lithography machine, and the world's top chip manufacturers will be willing to buy it.

In fact, like ASML's lithography machine, Nikon can produce more than 20 or 30 such machines throughout the year.

In other words, this also needs to be booked at least one year in advance, otherwise, even if you have money, people will not be able to deliver the goods.

At this moment, Hu Shaoming couldn't help but exclaimed, pointed not far away and said, "Is that Kuyard's ion single crystal furnace? There are actually two, and they are the latest models!"

The more people looked at it, the more shocked they became, and the more they looked at it in astonishment.

Seeing this, Lu Hui said, "Let's go over there and see one by one."

Lu Hui's words were exactly what the technicians wanted, and even Jiao Dagong was a little excited.

There are not many domestic chip manufacturers themselves, most of them are relatively rich, and it is not surprising to have one or two such advanced machines.

But it would be a bit too much to consolidate so many of the most advanced machines in the world into one enterprise.

I am afraid that even a very professional SMIC cannot do it. After all, the technical level of SMIC has only just reached 14 nanometers.

However, Jiao Dagong still felt that it was impossible for this company to save a lot of chip production lines. After all, the most core machine and equipment was a lithography machine.

At present, only ASML's lithography machine is the only one in the world that can produce high-tech chips. The lithography machines of other brands are much worse and can only produce low-key chips.

In other words, if you want to build an advanced chip manufacturing production line, ASML's lithography machine is a hurdle that cannot be bypassed.

But the current international environment is more complicated, not to mention the latest model of ASML lithography machine, even the old model of the past, can not enter the country.

If you have money, you can't do it. If you have money, you won't be able to sell it. You have no way to fart.

So there is only one way to get ASML lithography machine, and that is to buy second-hand.

But second-hand is not a good idea to buy.

There are too few goods. Even if a famous big company has eliminated the old lithography machine and is willing to sell it, it will take hundreds of millions of soft sister coins to make a bottom.

Anyway, what Jiao Dagong thinks, it is impossible for Guanglan Electronics to get an advanced ASML lithography machine.

At this time, everyone and Lu Hui had come to one end of the production line and started to check one by one machine by machine.

Speaking of chip manufacturing equipment, there are quite a few, such as plasma etching machines, reactive ion etching systems, ion implanters, single crystal furnaces, wafer dicing machines and so on.

The more the four technicians looked, the more frightened they became, and the more excited they became.

Advanced, these machines are too advanced.

Even if Jiao Dagong intentionally or unintentionally wanted to show his contempt for Guanglan Electronics, there was absolutely no way he could do it.

At this moment, Xia Lei did not observe those brand-new machines too much, but carefully looked at the expressions of Wei Chao, Jiao Dagong, Liu Xingshan, and Hu Shaoming.

After all, Xia Lei is not an expert. Even if he has a little knowledge of chip production, he can't see the specific situation of the equipment. Therefore, only by observing the experts called by Xia Lei can we see the results.

And the expressions of these four people made Xia Lei feel quite satisfied.

Not only that, but it far exceeded expectations.

Of course, Xia Lei still had to ask to confirm his judgment.

When Li Tianyu went to explain the matter to Lu Hui, Xia Lei took the opportunity to communicate with the four technicians.

Xia Lei: "Jiao Dagong, Wei Chao, what do you think of the equipment of this production line? Can it produce high-standard chips?"

This question raised by Xia Lei is very skillful. He just said "high standard" chips, which is too vague.

It's mainly because Xia Lei doesn't know the situation, and it's hard to say too much.

In case this production line of Guanglan Electronics can only produce chips of 28 nanometers, Xia Lei insists on saying 14 nanometers, or even 7 nanometers. If Li Tianyu hears it, he will feel embarrassed!

Wouldn't it be embarrassing to ask a little-known domestic medium-sized enterprise that has just been named to produce 14-nanometer or even 7-nanometer process chips!

Xia Lei has been in the business world for many years, and he is very good at things before and after, and he will definitely not do things that embarrass Li Tianyu.

After all, Li Tianyu has a very close relationship with Ai Baoquan, and it is very important to maintain a good relationship with him.

After hearing Xia Lei's question, Wei Chao immediately responded, "Mr. Xia, look now... Guanglan Electronics is so powerful, all these equipments are of the highest level!"

Xia Lei was stunned. He knew that these devices would not be too low-key. He didn't expect to be so high-end by Wei Chao.

Xia Lei: "Top? Top domestic?"

Wei Chao shook his head with an excited look on his face: "It's the best in the world, Mr. Xia, there's nothing better than these devices!"

This time, even Xia Lei showed a look of astonishment, feeling a little incredible.

Guanglan Electronics, no, how did Li Tianyu put together these advanced machines and equipment in such a short period of time?

Although Li Tianyu said that he had been preparing for a long time, to be honest, Xia Lei didn't believe it at all.

How long is a long time? a year? two years? Or three years, four years?

How old was Li Tianyu at that time, could he predict the future and see the current international trends?

Xia Lei couldn't help shaking his head.

It doesn't make sense, it doesn't make sense at all!

At this time, Jiao Dagong said: "Mr. Xia, although the equipment I have seen now is indeed very advanced, the most important thing has not yet been seen."

Xia Lei certainly understood what Jiao Dagong was talking about.

Of course, it is the lithography system, which can be said to be the core equipment of chip manufacturing.

At this time, Li Tianyu and Lu Hui finished their exchange and came over.

Xia Lei said with a smile: "Brother Li, these little brothers I brought were stunned by your Guanglan Electronics equipment."

Li Tianyu quickly and humbly replied: "That's really thanks to all the technical brothers for your promotion."

Wei Chao couldn't help but give a thumbs up: "Mr. Li, this production line is definitely domestic, no, it's the best in the world, but we want to see..."

Seeing Wei Chao's reluctance to speak, Li Tianyu said with a smile, "Do you want to see a lithography machine?"

Wei Chao nodded.

Jiao Dagong: "Mr. Li, we are very curious, has Guanglan Electronics got the lithography machine?"

Li Tianyu nodded: "Of course I got it, otherwise I wouldn't say that the production line has been set up."

Jiao Dagong: "What brand of lithography machine is that?"

Li Tianyu laughed, and it was difficult for him to answer for a while. He couldn't say it was a "miscellaneous brand", right?

Li Tianyu: "Let's go and see it, Mr. Lu should have already arranged it."

In fact, what Li Tianyu told Lu Hui just now was also about the lithography machine.

Li Tianyu asked Lu Hui to arrange several trained technicians to start the lithography machine.

In doing so, it is also convenient for these chip technology experts to view various parameters.