Chapter 104 Product Launch (4)

The large screen is divided into two interfaces, one shows the internal operation of the square-shaped device, and the other shows the interface of the industrial software, the three-dimensional dog model that Tang Shaohong just drew.

The industrial software is in a state of data reading and is associated with a running cube-shaped device.

Inside the device, countless tiny probes suddenly protruded, and they spewed micro-particle powder together, depicting its model along the phantom of the three-dimensional model.

"What is this doing!"

"Wow! What an amazing device, do you want to 'build' that model?"

"Is this a 3D printer?"

"That's right! It should be a 3D printer!"

...

Looking at the operating mode of the equipment, the audiences who were temporarily off the stage and those who watched the live broadcast on the screen were all guessing, and they probably understood something.

Two or three minutes later, the inside of the square device was drawn with tiny lines drawn by special powder to draw a network diagram of a three-dimensional model. The next moment, those tiny probes shrank back, and the micropores on the inner wall spit out a A pale silver powder filled the entire device.

The device kept humming, however, and it was impossible to see what was going on inside.

Tang Shaohong looked around the audience and explained with a smile: "What everyone sees now is that our company has launched a new product of the polymerization-nano 3D printer, which has three main components, the most critical closed printing cabin, nanomaterials Ingredient box, core data controller.”

"The upper and lower sides of the closed print cabin are equipped with magnetic field control panels, temperature controllers, wind direction controllers, micro-lasers, micro-spray tubes, plastic dosing tubes, etc. The functional control system forms a precise, complex, A system for polymerizing nanomaterials."

"Nano material ingredient box, which contains some new nano metal particle materials, which can be assembled with different materials according to the material requirements of printing accessories,..."

"The core data controller adopts a WI series motherboard, a micro N series biochip, ..., which can perform 670 million operations per second, realize accurate data reading, accurate printing and driving, and organize various functions of the equipment and control it accurately."

"The core data controller reads the 3D model in the industrial software, performs data processing, drives the printer to work,..."

...

Tang Shaohong, facing the audience below the booth, introduced the functional parameters of the 3D printing equipment and its working mode one by one.

With Tang Shaohong's introduction, the audience all showed a sudden realization.

"Ha! I guessed it right, it's really a 3D printer!"

"You can still 'print' like this! Can you succeed?"

"Amazing!"

"No! Can something printed like this be used?"

"How to control the polymerization accuracy of powder materials!"

"..."

The audience stared at the big screen and watched the structural changes inside the device, all anticipating its print.

In the closed printing cabin, the dense nano-powder material, under the control of the magnetic field force and the strong wind, quickly condensed the structural network of the model, and a burst of high-temperature red light flashed away.

With a bang, the printing hatch opened on its own, and a silver metal dog appeared. The external structure was almost identical to the 3D model design drawn by Tang Shaohong.

Tang Shaohong designed a three-dimensional model of a bulldog, which is highly similar to a real dog, and won warm applause from everyone for his superb painting art.

Through this polymerization-nano 3D printer, a bulldog with shiny silver was printed, which is integrated and lifelike.

Tang Shaohong stepped forward, took out the bulldog model from the printing cabin, and showed it to everyone with both hands in his hands.

Tang Shaohong looked around the audience and introduced with a smile: "This is a finished model made by a polymerized-nano 3D printer on-site, using nano-scale metal particle materials.

The error between its accuracy and design drawings can be controlled within 50 nanometers. Combined with Xingyao Seiko software, it can process components with any complex structure. It takes about 10-20 minutes to process a part. "

"Papapa..." With Tang Shaohong's introduction, the audience applauded excitedly.

"Great! It's really printed!"

"Nano-level precision, how to do it!"

"As soon as this reprinting device comes out, the whole 3D printing industry will change!"

"Is this equipment expensive? How about the quality of the printed parts!"

"It can only be printed with nano metal particle materials. The price of this product is not cheap!"

"..."

While the audience applauded, there were more speculations and discussions. The unique printing mode of this new 3D printer is eye-catching.

However, this new 3D printer uses special nano-metal materials, adopts a lot of advanced technology, and has very innovative design ideas. It is definitely a heavyweight technology product, and the price is definitely not cheap.

The most important thing that restricts the promotion and use of high-tech products is often the price. They are very curious about the price of this new 3D printer.

"Thank you! Thank you for the applause!" Tang Shaohong put the model dog on top of the printer, smiled thankfully, and signaled to continue speaking.

Upon seeing this, the audience stopped applauding and looked at Tang Shaohong, waiting for her to speak.

Looking at the quiet scene, Tang Shaohong went on to introduce: "Everyone must be very curious to know the price of the polymerized-nano 3D printer. Next, I will introduce it to you."

After speaking, Tang Shaohong turned sideways and looked at the big screen behind him.

The big screen changes to display three types of printers: large, medium and small.

"Polymerization-nano 3D printer, there are three models, the specifications are: 75 cm type, 45 cm type, 15 cm type, their prices are: 30 million, 10 million, and 3 million, 75 The centimeter-type polymerized-nano 3D printer can print large-scale mechanical parts and construction machinery parts. The 45-centimeter type is generally used to print auto parts and medium-sized instrument parts. The 15-centimeter type is suitable for printing some small equipment and parts. "Tang Shaohong introduced with a smile.

After a pause, Tang Shao waved his hand again, and the big screen changed, revealing a lot of nano-metal powder materials.

"The above are the nano-printing materials newly developed by our company, including: nano-scale titanium steel metal particles, nano-scale nickel-iron metal particles, nano-scale high-carbon titanium metal particles, ... The above twenty-four new nano-metal particle materials, It is specially used for polymerization-nano 3D printers, which can be configured to print many high-performance components." Tang Shaohong looked at the big screen and introduced them one by one with a smile.

Listening to Tang Shaohong's introduction, there was a sudden 'crashing' sound from the audience below the stage, causing chaos.

"So many new nanomaterials? True or false!"

"Xingyao Technology is not an Internet company? It is also engaged in industry!"

"Amazing! Xingyao Technology is preparing to show its strength in the field of 3D printing!"

"No wonder you dare to release this 3D printer. It turns out that nanomaterials are the focus!"

"..."

The auditorium under the booth was boiling again, and they were all shocked by the layout of Xingyao Technology in this field.

Looking at the excited audience under the stage, Tang Shaohong smiled happily. This is just the beginning, and the show is still to come!